Group Paging - AT&T PARTNER Installation And Use Manual

Group Paging

Description
This telephone option lets users simultaneously page all system extensions with
MLS-18D, MLS-12D, MLS-12, and MLS-6 phones. When paging, the caller
hears a beep and begins speaking; the caller's voice is then heard on the
speakers of all idle MLS-18D, MLS-12D, MLS-12, and MLS-6 phones.
Considerations
You can use this option manually, or you can store it on an Auto Dial button.
MLC-6 and standard phones will not receive group-page announcements.
If a user leaves the microphhone on for hands-free answer on intercom
(HFAI), the microphone is turned off when that phone receives a group
page; the user must lift the handset or press [
a group page, the microphone is turned on again.
Changing Settings
To store (or remove) the group page option remotely from extension 10:
1. Press [
Feature
2. Press left [
3. Press right [
4. Dial the two-digit number of the extension (11–21) for which you want the
option stored (or removed).
5.
Press the Auto Dial button on which you want the option stored (or removed).
6. To store the option, press [
To remove the option, press [
7. Press [
Feature
Using
System Phone
To use when stored on a button, lift the handset and press the Auto Dial button.
To use manually:
1.
Lift the handset and press [
2. Dial [ ] [
3.
After the beep, start talking.
Standard Phone
1. Lift the handset.
2. Dial [ ] [
3.
After the beep, start talking.
5-16
Group Paging
] [ ] [ ].
0 0
] twice.
Intercom
].
Intercom
Intercom
].
Mic
] [ ] [ ].
0 0
Intercom
].
7
].
7
] to answer the page. After
Mic
] [ ] [ ].
7
].