Automatic Line Selection - AT&T MERLIN 3070 Attendant's Manual

AUTOMATIC LINE SELECTION

This feature controls the order in which the system selects outside lines
when you lift your handset to place a call. You can, for instance, program
the line you use most often to be the first line in the Automatic Line Selec-
tion, a line you use less frequently to be the next line the system selects,
and soon. Then, when you pick up your handset, the system automatically
selects the line you usually use, if it is not busy. If that line is busy, the
system automatically selects your second choice, unless it is also busy.
You can specify up to eight of your line or intercom buttons for an
Automatic Line Selection sequence.
NOTE: If you're planning to program other features during this program-
ming session, program Automatic Line Selection first. If you're already
in the middle of a programming session, slide the T/P switch to the center
position, then back to P.
To program an Automatic Line Selection sequence:
Slide the T/P switch to the P position.
Dial **.
Touch the line buttons in the order you prefer.
Slide the T/P switch to the center position.
36