Feature Programming Chart - AT&T MERLIN 3070 Attendant's Manual

Use this chart to program custom features on your console quickly and easily. To program one or more buttons at once:
Feature Name
(Suggested Button Label)
QUICK DIALING FEATURES
Outside Auto Dial
Auto Intercom
System Speed Dial
Saved Number Redlal
Last Number Redial
52

Feature Programming Chart

Label the button(s) you want to program.
Slide the T/P (Test/Program) switch, located on the left side of your console, to the
(Program) position.
P
Your console rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
Touch the first button to be programmed,
Dial the feature's programming code and additional numbers or special characters
(if required). If you make a mistake, touch the button again and reenter the code.
If you want to program other buttons, repeat the previous
Slide the T/P switch to the center position.
P r o g r a m m i n g
Dial + an outside number, account
*90
number, or PBX, Centrex, or Custom Calling
feature code
Dial *91 + a 2-digit MERLIN system inter-
com number.
Dial *95 + a 2-digit System Speed Dial
code (60 through 99 — do not enter the #).
Dial *
74.
Dial *73.
two steps.
C o d e
Notes
See page 37.
A button with lights is recommended but not
required, See page 11.
You don't have to assign these codes to but-
tons; you may dial the code instead, See
page 38.
See page 48.
See page 47.