Lucent Technologies CentreVu Release 3 Version 8 High Availability Connectivity, Upgrade and Administration User Manual page 30

Upgrading CMS to the High Availability Option
Performing a CMSADM Backup
If you receive the message displayed above, insert the first
tape used in the backup and press Enter. Wait for the tape
drive light-emitting diode (LED) to stop blinking before you
remove the tape.
When prompted, repeat this process for any additional tapes
generated by the backup process. When the final tape is
verified, the program displays the output shown above in step
4a.
6. Save the tapes and the vfstab printout until a backup restore is
performed.
!
CAUTION:
Label all tapes with the tape number and the date of the backup.
Set the tape write-protect switch to read-only.
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
3-10