Lucent Technologies CentreVu Release 3 Version 8 High Availability Connectivity, Upgrade and Administration User Manual page 51

Upgrading CMS to the High Availability Option
Setting Up CMS on an HA Server
10. Enter the name for the switch associated with ACD 1. The program
responds:
Select the model of switch for this ACD
1) Definity-G3V2
2) Definity-G3V3
3) Definity-G3V4
4) Definity-G3V5
5) Definity-R6/R7
6) Definity-R8
Enter choice (1-6):
11. Enter the option number associated with switch model associated
with this ACD. For the initial release of the HA option, Definity-R8 is
the only viable option.
If the switch supports vectoring and vectoring is authorized, the
following message appears; otherwise, go to Step 14:
Is Vectoring enabled on the switch? (y/n):
12. Enter y if vectoring is enabled on this switch; otherwise, enter n.
The following message appears if vectoring is enabled, the switch
supports EAS, and EAS is authorized. If the message does not
appear, go to Step 14.
Is Expert Agent Selection enabled on the switch? (y/n):
13. Enter y if EAS is enabled on this switch; otherwise, enter n. The
program responds:
Does the Central Office have disconnect supervision?
(y/n): (default: y)
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
3-31