Lucent Technologies CentreVu Release 3 Version 8 High Availability Connectivity, Upgrade and Administration User Manual page 65

Upgrading CMS to the High Availability Option
Setting Up CMS on an HA Server
7. Verify that the installation completed successfully by entering the
following:
tail -f /cms/install/logdir/admin.log
The -f option in the tail command updates the console as
messages are written to the admin.log file. All failure messages
are logged in this file. The CMS software is successfully set up when
you see a message similar to the following:
File systems/space available:
/cms
File systems/current blocks free:
/cms
/cms: VDN,TKGRP,VECTOR,TRUNK,AGENT_LOG_REC,
AGENT_TRACE_REC,SPLIT,AGENT,EXCEPTIONS_REC,WORKCODE,
CALL_REC,
Number of calls to fill_fs():12
Setup completed successfully <data/time>
You may edit this file and add comments about the packages that
were installed or authorized.
8. Press the Delete key to break out of the tail -f command.
If you need to install additional CMS-related feature packages
(Forecasting or External Call History), go to
on Page 3-46.
If you are not installing any other feature packages, do the following to
turn on CMS:
1. Access the CMS Services menu by entering cmssvc.
The menu appears.
2. Enter 3 to select the run_cms option.
3. Enter 1 to turn on CMS.
CMS turns on.
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
12994480
12994480
"Installing Feature Packages"
3-45