Lucent Technologies CentreVu Release 3 Version 8 High Availability Connectivity, Upgrade and Administration User Manual page 50

Upgrading CMS to the High Availability Option
Setting Up CMS on an HA Server
6. Press enter to accept the default.
The program responds:
Select the type of backup device you are using
1) SCSI QIC-150 cartridge tape - 150MB tape
2) 40.0 Gbyte 8mm tape
3) 14.0 Gbyte 8mm tape
4) 5.0 Gbyte 8mm tape
5) SCSI QIC-2.5 cartridge tape - 2.5GB tape
6) SCSI 4-8 SLR cartridge tape - 4GB tape (8GB compressed)
Enter choice (1-6):
7. Enter the number to specify the type of cartridge tape you are using
as the backup device. The program responds:
Enter the default backup device path:
(default: /dev/rmt/0c)
Enter the default backup device path.
The correct device path will show information similar to the following
example:
Mammoth EXB-8900 8mm Helical Scan tape drive:
sense key(0x0)= No Additional Sense
residual= 0
file no= 0
8. After you enter the correct device path, the program responds:
Enter number of ACDs being administered (1-8):
9. Enter the number of ACDs to be administered. This number may be
less than the number of ACDs authorized. The program responds:
Information for ACD 1
Enter switch name (up to 20 characters):
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
retries= 0
block no= 0
3-30