Lucent Technologies CentreVu Release 3 Version 8 High Availability Connectivity, Upgrade and Administration User Manual page 82

Upgrading CMS to the High Availability Option
Setting Up the NTS
10. Enter the appropriate Subnet mask, or press Enter to accept the
default. The program responds:
Subnet mask: xxx.xxx.xxx.xxx
Enter preferred load host Internet address [<any host>]::
11. Enter the IP address of the CMS computer. The program responds:
Preferred load host address xxx.xxx.xxx.xxx
Enter Broadcast address [0.0.0.0]::
12. Press Enter to accept the default broadcast message address. The
program responds:
Enter Preferred dump address [0.0.0.0]::)
13. Enter the IP address of the CMS computer. The program responds:
Preferred dump address: xxx.xxx.xxx.xxx
Select type of IP packet encapsulation (ieee802/ethernet)
[<ethernet>] ::
14. Press Enter to accept the default IP packet encapsulation. The
program returns to the monitor:: prompt if you have a 64-port
NTS. Continue with Step 16.
The program responds with the following question if you have an 8-
or 16-port NTS:
Type of IP packet encapsulation: <ethernet>
Load Broadcast Y/N [Y]::
15. Enter N. The program returns to the monitor:: prompt.
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
3-62