Lucent Technologies CentreVu Release 3 Version 8 High Availability Connectivity, Upgrade and Administration User Manual page 109

Administering the Switch for CMS High Availability Systems
Administering the Definity Switch
Adding the
Processor Interface
Channels
change communication-interface processor-channels
Proc
Chan Enable
1:
2:
3:
4:
Use the Processor Channel form to assign the processor channel
attributes. With the High Availability option, you will assign two separate
processor channels.
4
PROCESSOR CHANNEL ASSIGNMENT
Gtwy
Appl. To Mode Link/Chan
y mis s
y mis s
Field
Proc Chan
Enable
Appl
Gtwy To
Mode
Interface Link
Interface Chan
Destination Node
Destination Port
Session Local/
Session Remote
Mach ID
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Interface Destination
Node
8 5001 cmshost
9 5001 cmshost2
Select a processor channel for this link. Use
the first channel available.
Enter y.
Enter mis.
Not used for CMS.
Enter s for server.
Enter the TCP/IP link number used on the
ethernet data module form. For this series of
examples, link 8 was used.
Enter the TCP channel number
(5000-64500). The default for CMS is 5001
and is defined during CMS setup (see
Page 2-33).
Enter the node name of the CMS computer
as assigned on the Node Names form. In
these examples, cmshost is used.
Use the default of 0.
Although not strictly required, the standard
CMS provisioning practice is to set the local
and remote port assignments equal to the
processor channel assignment for each
connection.
Not used for CMS.
Page 1 of X
Session
Port Local/Remote
0 1 1
0 1 1
Definition
4-15
Mach
ID
19