Quantum Trunk Properties - Altigen AltiContact Manager Version 4.6 Administration Manual

Setting General Trunk Attributes
Attribute
Tenant Selection

Quantum Trunk Properties

To configure a Quantum channel, select a Quantum channel from the trunk
channels list in the Trunk Configuration window, then click the Trunk
Properties button or double-click the list entry to view the Quantum
Trunk Line Properties dialog box.
Figure 3. Quantum Trunk Line Properties window
Note that you can use Apply to... on this dialog box to apply changes to
other trunks of the same type. See "Configuring One or Multiple Trunks"
on page 7-2.
7-6 AltiContact Manager Administration Manual
Description
The Tenant group assignment for the trunk,
configured from the Tenant Table window in
System Configuration, discussed in "Using a
Tenant Table" on page 5-22. If no tenant is selected,
any extension can use this trunk to make an out call.