Altigen AltiContact Manager Version 4.6 Administration Manual page 95

Software Installation
10. Setup will check AltiGen boards on your system.
Note: Setup will terminate if T1 Rev. A1/A2 or VoIP Rev. A1/A2
boards are found. These boards are not supported.
11. Setup will create a user account for AltiWare services. AltiGen
recommends that you do not change the default password. If you still
wish to change this, you may enter a password (no longer than 14
characters) for this account and click Next.
12. Setup is creating the user account.
13. Setup will install AltiContact Manager into a destination folder. Click
Next to install to the folder, or click Browse to install to a different
folder.
AltiContact Manager Administration Manual 3-13