Altigen AltiContact Manager Version 4.6 Administration Manual page 190

Configuring the Triton T1/PRI Board
• Clicking on a trunk in the Channel Mapping List invokes the T1
Trunk Properties dialog box (refer to "Triton T1/PRI Trunk
Properties" on page 7-15).
• The Board Configuration button invokes a configuration dialog box.
Figure 8. Triton T1 Configuration dialog box
This dialog box displays the board serial number and allows you to
reconfigure the Clock Frequency, Digit Duration, and the Firmware
File Name. The Operating mode is automatically displayed as T1/
PRI or E1/PRI.
• The Span Info window displays the Total Number of Spans on the
board and the status of the span in the Span Info window. To reset the
span, click the Reset Span button. Double clicking a span in this
window will invoke a configuration window, as discussed in the
following section.
See "T1 Clocking" on page 6-21 and the Status Messages table beginning
in the next section.
6-16 AltiContact Manager Administration Manual