Registration - Altigen AltiContact Manager Version 4.6 Administration Manual

Software Installation
License
SDK Application Session
Session
For step-by-step instructions on the licensing process, refer to page 3-29.

Registration

Licenses must be registered with AltiGen for the system to function at full,
licensed capacity. This registration includes both AltiContact Manager
systems information, as well as registering dealer, installer, and end user
(customer) data for each AltiGen system installed or upgraded to
AltiContact Manager.
All software must be registered, including AltiWare Office products. No
AltiGen software comes out of the factory pre-registered. All license keys
must be registered to the system key and without proper registration,
the system will function with only 8 extension ports enabled. To support
the new licensing and registration requirement, all copies of AltiContact
Manager software (new) are shipped with a system key.
Once registered, system keys have license keys associated with them. All
license keys are individually tracked and can only be registered to one
system key. Individual license keys cannot be reactivated or installed on a
different system once it has been registered the first time. The same license
key cannot be associated with multiple systems even on the same customer
site. Through registration, AltiGen tracks all licenses shipped, which
licenses have been installed and registered, and which license keys are
associated with each system key.
Type
•
This license enables trunk and extension ports to enter
APC state. In APC state, 3rd party applications can
control the port to perform the following functions:
—
Play phrase/tone
—
Play DTMF tone
—
Receive DTMF digit
—
Record voice (not conversation)
—
Switch to music
•
Requires SDK Connection Session license.
•
This license is mainly designed for IVR applications.
AltiContact Manager Administration Manual
Description/Notes
3-7