Hapter; Initial Configuration; A Note About Applying Edits To One Or Multiple Objects - Altigen AltiWare OE Release 4.0 Getting Started Manual

Initial Configuration

After installing AltiServ and AltiAdmin, the next step in getting started, is
to set up an initial configuration for the system—a minimum configuration
needed to run the system. You need to configure certain parameters for the
System, Trunks, Extensions, and Auto Attendant to bring the AltiServ to a
fully functional level of operation.
The detailed AltiWare configuration is the subject of the
AltiWare System Administration Guide. This manual covers
initial configuration and tips for quick configuration tips.

A Note About Applying Edits to One or Multiple Objects

Many AltiAdmin configuration windows—especially extension and
trunk—allow you apply changes to a particular object (trunk, extension,
workgroup, etc.) (Apply), or to select many objects to which to apply the
changes (Apply To
Generally, the way you work with extensions or trunks is to select the trunk
or extension in the General tab window, then click the other tabs to open
the other windows to configure other options for the selected trunk or
extension. The selected trunk or extension number appears in the title bar
for each window.
When you click the Apply To... button, you pop up a list of all extensions
or trunk to which the change could apply. By default, all the extensions or
trunks are selected. You then de-select the ones you don't want, or de-select
all and select the ones you want.
The Apply To... button is disabled unless there is a change that can be
applied to multiple extensions or trunks, and when you use it to apply
changes to multiple objects, it works on only those changed attributes that
can be applied.
For example, if you use Apply To... on the Extension General window
after you changed the person's name, you do not re-assign the same name
to others, because the name is not an attribute on which you can use Apply
to... multiple extensions.
...
).
AltiWare OE 4.0 Getting Started Manual 35
C 4
H A P T E R