Heat Factor; Installing A Cooling Fan - Altigen AltiWare OE Release 4.0 Getting Started Manual

Hide thumbs Also See for AltiWare OE Release 4.0:

Table of Contents

The following table contains the operating specifications for the AltiGen

telephony board.

Table 4. AltiGen Board Operating Environmentals

Description

Operating Temperature

Storage Temperature

Relative Humidity

Heat Factor

Internal system temperature must not exceed the specified operating

temperature. If more than two AltiGen telephony boards are installed in the

system, then additional cooling fans are suggested. These fans need to

effectively reduce heat and increase air flow to the AltiGen telephony

boards to insure system reliability.

If more than two AltiGen telephony boards are installed into the AltiServ

system, then an additional cooling fan will be required. This fan needs to

effectively reduce heat and increase air flow to the AltiGen telephony

boards to insure system dependability and reliability. To install a cooling

fan into the AltiServ system, read the instructions included with the fan

unit.

Specification

0° to + 50° C

-20° to +70° C

10% to 80% non-condensing

AltiWare OE 4.0 Getting Started Manual 5

System Requirements

Table of Contents

Do you have a question about the AltiWare OE Release 4.0 and is the answer not in the manual?

Altiware oe 4.0