Table of Contents
Advertisement
Software Installation
Installing AltiWare OE on Windows 2000
•
AltiWare OE supports the Windows 2000 Server platform. Earlier
software releases must be upgraded to OE 3.5A or OE 4.0 to work with
the Windows 2000 Server platform.
•
If installing AltiWare OE for the first time and wish to use the software
with Windows 2000, you must already be running Windows 2000
server prior to the AltiWare software installation.
AltiWare OE - New Installation
Before you begin, have the following information at hand:
•
The 20-digit software license key (located on the End User License
Agreement).
•
The system home area code.
•
The extension length.
The extension length, which is from 2 – 7 digits, is the number
of digits for all extension numbers. All extensions in the
AltiServ configuration must be the same length.
Note that you cannot change the extension length once the first
extension is configured, which is something you do later running the
AltiWare Setup. To change the extension after extensions are
configured requires re-configuring the entire system or deleting all the
extensions already configured.
To install AltiWare OE:
1.
Make sure you have prepared for installation as described beginning
on page 12.
2.
Login to Windows NT or Windows 2000 as a domain user account
which has both local and domain administrator privileges.
If your machine is a stand-alone server, you need to login as a local
administrator account.
3.
Insert the AltiWare OE CD-ROM into the CD-ROM drive.
4.
Select and read the Readme.txt file.
5.
After reading the Readme.txt file, click on SETUP.EXE in the
AltiWare OE folder.
14 AltiWare OE 4.0 Getting Started Manual
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the AltiWare OE Release 4.0 and is the answer not in the manual?