Scaling A Design To Fill The Hoop - Brother BES Monogramming Suite Instruction Manual

28 Pacesetter BES Monogramming Suite
Instruction Manual
3 Select the machine format from the drop-down list at the top
of the dialog.
If you choose the PES format, you will see that there is an
option to select "MultiNeedle" hoops. This applies only if you
have a MultiNeedle embroidery machine.
If you check this box, the list of hoop formats will change to a
list of hoops that are used with a MultiNeedle machine.
4 From the list of Hoops, choose a hoop size appropriate for
your design.
5 If needed, check the "Rotate 90" box to make the hoop fit
your design better.
6 Click OK.

Scaling a design to fill the hoop

The Fit Hoop automatically scales the current design to fill the
maximum size of a current hoop. This feature recalculates
stitches where necessary.
To scale designs to fill hoops:
1 Open an existing design.