Using The Wizard And Selecting The Auto Punch Function; Automatically Extracting Pattern Outlines; Design Center - Brother PEDESIGN 5.0 Instruction Manual

Step 4

Using the Wizard and Selecting the Auto Punch Function

1
Click on the menu bar, then click
Image
2
On the
Select Image to Stitch Method
it, and then click
Step 5

Automatically Extracting Pattern Outlines

1
Outlines are automatically extracted from the image and the
2
After the necessary settings are selected, click
14
dialog that appears, click the
.
Next
. Otherwise, click
Image to Stitch Wizard
•
The following stitch methods are also avail-
able.
- Photo Stitch 1 (Color and Mono)
See the function details on page 183.
- Photo Stitch 2 (Color and Mono)
See the function details on page 190.
- Cross Stitch
See the function details on page 195.
- Design Center, Starting Design Center
See "Using Design Center" on page 16 or the
function details on page 61.
Image Analysis
N Detailed settings for the imported image can
be adjusted and, if
settings can be applied.
N Areas that are not to be sewn appear with a
crosshatch pattern. Click each area to set
whether it should be sewn or not.
.
Finish
on the Toolbar.
check box to select
Auto Punch
dialog appears.
is clicked, the new
Retry