Table of Contents
Advertisement
Chapter 1 Preparation of Embroidery Machine
4-6 Attachment of Embroidery Hoop and Frame
Attaching a square frame and a flat hoop frame (standard)
Figure A
r
1. Attach flat hoop frame (assembly) q to X carriage w, and tighten two screws e.
Fit the projections of the X carriage into the inner holes.
2. Loosen two screws r. Attach square frame t.
3. As shown in Figure A, fit the left metal part of the square frame to the screw. As shown in
Figure B, fit the right metal part to the screw. Tighten two screws r securely.
4. If the material over the square frame is not set properly, stitches may be skipped, threads
may be broken, or the material may shrink during embroidering. Make an adjustment using
screw y.
32
w
BES-916AC • BES-1216AC
e
y
t
q
Figure B
r
Advertisement
Table of Contents
