Removing And Installing The Small Air Baffle; Removing The Small Air Baffle; Installing The Small Air Baffle; Figure 43. Removing The Small Air Baffle - Intel SR1600UR - Server System - 0 MB RAM Service Manual

Removing and Installing the Small Air Baffle

Some installation processes require that you remove the small air baffle that is placed
behind the hard drive bays, near the front of your server. The following sections describe
how to remove and then install the small air baffle. Use the steps in these sections only
when it is indicated as necessary for a component installation process.
Always operate your server system with the small air baffle in place. The small air baffle
is required for proper airflow within the server system.

Removing the Small Air Baffle

Pull up and out on the air baffle to remove it (see

Installing the Small Air Baffle

To install the small air baffle, follow these steps:
1. Lower the baffle into the server system and position the baffle over the two standoff
locations.
2. Snap the baffle into place as shown in
56

Figure 43. Removing the Small Air Baffle

Figure
Figure 43).
AF002885
44.
®
Intel Server System SR1600UR Service Guide