Removing The Power Supply Unit; Installing The Power Supply Unit; Removing And Installing The Node Tray Air Duct; Figure 26. Removing The Psu - Intel H2000WP Series Service Manual

Removing the Power Supply Unit

1. Carefully push in the latch on the right hand of PSU.
2. Pull the handle with the PSU while still press the latch.

Installing the Power Supply Unit

1. Align and slide in the PSU to the power cage rail.
2. Push the PSU along the rail until the latch locks in position with a "tick" sound.

Removing and Installing the Node Tray Air Duct

Always operate your server system with the air duct in place. The air duct is required for proper airflow
within the server system.
®
Intel Server System H2000WP Family Service Guide

Figure 26. Removing the PSU

Figure 27. Installing the PSU

Hardware Installations and Updates
19