Figure 25. Setup Utility - Exit Screen Display; Table 26. Setup Utility - Exit Screen Fields - Intel X38ML - Server Board Motherboard Technical Manual

Intel® Server Board X38ML
Error Manager
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default Values
Load User Default Values
Setup Item
Save Changes and Exit
Discard Changes and
Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default
Values
Load User Default
Values
Revision 1.3
Exit
Figure 25. Setup Utility — Exit Screen Display
Table 26. Setup Utility — Exit Screen Fields
Help Text
Exit BIOS Setup Utility after saving changes.
The system will reboot if required.
The [F10] key can also be used.
Exit BIOS Setup Utility without saving changes.
The [Esc] key can also be used.
Save changes without exiting BIOS Setup
Utility.
Note: Saved changes may require a system
reboot before taking effect.
Discard changes made since the last save
changes operation was performed.
Load factory default values for all BIOS Setup
Utility options.
The [F9] key can also be used.
Save current BIOS Setup Utility values as
custom user default values. If needed, the user
default values can be restored using the Load
User Default Values option below.
Note: Clearing CMOS or NVRAM will cause the
user default values to be reset to the factory
default values.
Load user default values.
Intel order number E15331-006
Comments
User is prompted for confirmation only
if any of the setup fields were
modified.
User is prompted for confirmation only
if any of the setup fields were
modified.
User is prompted for confirmation only
if any of the setup fields were
modified.
User is prompted for confirmation only
if any of the setup fields were
modified.
User is prompted for confirmation.
User is prompted for confirmation.
User is prompted for confirmation.
System BIOS
49