Connector/Header Locations and Pin-out
7.4.4
SATA Connectors
The server board provides up to six SATA / SAS connectors:
SATA-0 (J9B2)
SATA-1 (J9B3)
SATA-2 (J9C1)
SATA-3 (J9C2)
SATA-4 (J9B5)
SATA-5 (J9B4)
The pin configuration for each connector is identical and defined in the following table.
Pin
1
GND
2
SATA_TX_P
3
SATA_TX_N
4
GND
5
SATA_RX_N
6
SATA_RX_P
7
GND
7.4.5
Intel
I/O Expansion Module Connector
®
The server board provides 2x internal 50-pin Intel
(J2B1, J3B1) to accommodate proprietary form factor Intel
expand the I/O capabilities of the server board without sacrificing an add-in slot from the riser
cards. There are multiple Intel
information on the supported Intel
Module Hardware Specification. The following table details the pin-out of the Intel
Expansion Module connectors.
64
Table 42. SATA Connectors
Signal Name
Ground
Positive side of transmit differential pair
Negative side of transmit differential pair
Ground
Negative side of receive differential pair
Positive side of receive differential pair
Ground
®
I/O Expansion Modules for use on this server board. For more
®
I/O Expansion Modules, refer to the Intel
Intel order number E53971-008
Intel® Server Board S5500WB TPS
Description
®
I/O Expansion Module style connector
®
I/O Expansion Modules, which
®
Server Board IO
®
I/O
Revision 1.9