Appendix B: Video Post Code Errors; Table 58. Post Error Messages And Handling - Intel S5500WB12V Specification

Appendix B: Video POST Code Errors

Appendix B: Video POST Code Errors
Whenever possible, the BIOS outputs the current boot progress codes on the video screen.
Progress codes are 32-bit quantities plus optional data. The 32-bit numbers include class,
subclass, and operation information. The class and subclass fields point to the type of hardware
being initialized. The operation field represents the specific initialization activity. Based on the
data bit availability to display progress codes, a progress code can be customized to fit the data
width. The higher the data bit, the higher the granularity of information that can be sent on the
progress port. The progress codes may be reported by the system BIOS or option ROMs.
The Response section in the following table is divided into three types:

No Pause: The message is displayed on the local Vidoe screen during POSTor in the
Error Manager. The system continues booting with a degraded state. The user may
want to replace the erroneous unit. The setup POST error Pause setting does not have
any effect with this error.

Pause: The message is displayed on the Error Manager screen, and an error is logged
to the SEL. The setup POST error Pause setting determines whether the system pauses
to the Error Manager for this type of error, where the user can take immediate corrective
action or choose to continue booting.

Halt: The message is displayed on the Error Manager screen, an error is logged to the
SEL, and the system cannot boot unless the error is resolved. The user needs to
replace the faulty part and restart the system. The setup POST error Pause setting does
not have any effect with this error.
Error Code
0012 CMOS date / time not set
0048 Password check failed
0108 Keyboard component encountered a locked error.
0109 Keyboard component encountered a stuck key error.
Fixed Media The SAS RAID firmware can not run properly. The user should
0113
attempt to reflash the firmware.
0140 PCI component encountered a PERR error.
0141 PCI resource conflict
0146 PCI out of resources error
0192 Processor 0x cache size mismatch detected.
0193 Processor 0x stepping mismatch.
0194 Processor 0x family mismatch detected.
0195 Processor 0x Intel(R) QPI speed mismatch.
0196 Processor 0x model mismatch.
0197 Processor 0x speeds mismatched.
0198 Processor 0x family is not supported.
019F Processor and chipset stepping configuration is unsupported.
5220 CMOS/NVRAM Configuration Cleared
5221 Passwords cleared by jumper
5224 Password clear Jumper is Set.
96

Table 58. POST Error Messages and Handling

Error Message
Intel order number E53971-008
Intel® Server Board S5500WB TPS
Response
Major
Major
Minor
Minor
Major
Major
Major
Major
Fatal
Minor
Fatal
Major
Fatal
Fatal
Fatal
Major
Major
Major
Major
Revision 1.9