Connector/Header Locations and Pin-out
7.2
System Management Headers
7.2.1
Intel
Remote Management Module 3 (Intel
®
®
A 34-pin Intel
RMM 3 connector (J5B1) is included on the server board to support the optional
®
Intel
Remote Management Module 3. There is no support for third-party management cards on
this server board.
Note: This connector is not compatible with the Intel
®
RMM) or the Intel
Remote Management Module 2 (Intel
7.2.2
BMC Power Cycle Header (12V Only)
A header is provided so you can use an external switch to remove power from the BMC. In
effect, it causes a BMC Power on reset to occur.
Pin
1
2
If this switch is used while the system power is still applied, then the main power rail regulators
is disabled first, then the main 3.3V S/B regulator is disabled, removing power from the BMC.
The usage of this header is to recover a non-responsive board, possibly caused by a
hung BMC.
54
®
Table 29. Intel
RMM3 Connector Pin-out (J5B1)
Table 30. BMC Power Cycle Header (J1D2)
Description
RST_BMC_PWR_CYC
GND
Intel order number E53971-008
RMM3) Connector
®
®
Remote Management Module (Intel
®
RMM2).
Note
When power is removed from the BMC.
Intel® Server Board S5500WB TPS
Revision 1.9
®