Table 28. Magjack3 Connector (Dual Usb + Rj45, 10/100) Pin Out (Ja5A1); Table 29. Sata 7-Pin Connectors Pin Out (J9E1, J9F1, J9G1, J9H1, J9H2, J9J2) - Intel S875WP1LX Specification

S875WP1-E TPS

Table 28. Magjack3 Connector (dual USB + RJ45, 10/100) Pin Out (JA5A1)

Pin
1 VREG_USB_BP_LEFT
2 USB_BACK5_R#
3 USB_BACK5_R
4 GND
5 VREG_USB_BP_LEFT
6 USB_BACK6_R#
7 USB_BACK6_R
8 GND
9 NC
10 LAN_TDP
11 LAN_TDN
12 LAN_RDP
13 LAN_RDN
14 NC
15 NC
5.7 SATA/SATA RAID Connectors
The S875WP1-E board provides two (S875WP1) or six (S875WP1LX) SATA/SATA RAID
connectors. The pin out for all connectors is identical and is listed in the following table.

Table 29. SATA 7-pin Connectors Pin Out (J9E1, J9F1, J9G1, J9H1, J9H2, J9J2)

Revision 4.0
Signal Name Pin
16 NC
17 NC
18 GND
19 LAN_SPEEDLED#
20 3.3V Stdby
21 LAN_LILED#
22 LAN_ACT_LED#
23 GND
24 GND
25 GND
26 GND
27 GND
28 GND
29 GND
30 GND
Pin Signal Name
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
Connectors and Jumper Blocks
Signal Name
45