Me Firmware Force Update (J7A2); Serial Interface (J6A2) - Intel S5500WB12V Specification

Intel® Server Board S5500WB TPS
6.1.6

ME Firmware Force Update (J7A2)

1-2
2-3
The ME firmware consists of two operational images and a recovery image. During boot, the
recovery loader is started first and it tries to load the active firmware image by running the
loader of this image. If it fails to boot, it tries to boot the other operational image. If both fail, the
recovery loader starts in recovery mode. The recovery mode can also be forced setting the
MGPIOx jumper on the board. Boot image verification and boot failure
6.1.7

Serial Interface (J6A2)

1 – 2
3 – 4
Revision 1.9
Pins
Disabled (Default)
Enabled
Pins Mode
DCD to DTR
DSR to DTR
Intel order number E53971-008
ME Firmware Update Mode
Description
Data Carrier Detect
Data Set Ready
Configuration Jumpers
51