Table 26. 12-V Only 2X4 Connector (Replaces Epsd12V 2X12 Connector) (J9D2); Table 27. 12-V Only Power Control (Replaces The 1X5 Power Control) (J9D1); Table 28. Peripheral Power (Only For 12-V Only Sku) (J8K2) (Ipn: C22293-003 Molex Connector Corporation 43045-0627) - Intel S5500WB12V Specification

Intel® Server Board S5500WB TPS

Table 26. 12-V only 2x4 Connector (replaces EPSD12V 2x12 connector) (J9D2)

Table 27. 12-V Only Power Control (replaces the 1x5 power control) (J9D1)

(FOXCONN ELECTRONICS INC HF1107V-P1 or TYCO ELECTRONICS CORPORATION 5-104809-6)
Table 28. Peripheral Power (Only for 12-V only SKU) (J8K2)
(iPN: C22293-003 MOLEX CONNECTOR CORPORATION 43045-0627)
Note: This connector is for output power only. The 5V is limited to 6.5A and the 3.3V is limited
to 2A. Pin 4 is a 3.3V output Power Good signal if needed for a backplane
Revision 1.9
Pin Signal Name
1 GND
2 GND
3 GND
4 GND
5 +12V
6 +12V
7 +12V
8 +12V
Pin Signal Name
1 SMB_PWR_CLK
2 SMB_PWR_DAT
3 SMB_PWR_ALRT
4 Remote Sense Return
5 12V Remote Sense
6 PS_ON
7 5V S/B
Pin Signal Name
1 5V
2 5V
3 GND
4 Powergood
5 3.3V
6 GND
Intel order number E53971-008
Connector/Header Locations and Pin-out
53