Raidcom Get Thp_Pool; Examples - HP StorageWorks P9000 Reference Manual

Option
-ldev_id <ldev#> ...
[ -cnt <count> ]
-grp_opt <group
option>
-device_grp_name
<device group name>
[<device name>]
[ -user_threshold
<threshold_1>
[<threshold_2>] ]

Examples

By using LDEVs:400, 401, and 402, creating a pool of Pool ID:1, pool name: my_pool for Thin
Provisioning.
# raidcom add thp_pool -pool_id 1 -pool_name my_pool -ldev_id 400 401 402
By using LDEVs:500, 501, and 502, creating a pool of Pool ID: Allocated automatically, Pool
Name: my_pool for Thin Provisioning.
# raidcom add thp_pool -pool_name my_pool -ldev_id 500 501 502
By using LDEVs:600, 601, and 602, creating a pool of Pool ID: 2, Pool Name: Allocated
automatically for Thin Provisioning.
# raidcom add snap_pool -pool_id 2 -ldev_id 600 601 602
By using LDEVs: 700, 701, and 702, creating a pool of Pool ID: 3, Pool Name: my_pool for Thin
Provisioning with the user-defined thresholds WARNING specified to 70% and High water mark
to 80%.
# raidcom add thp_pool -pool_id 3 -pool_name my_pool -ldev_id 700 701 702 -user_threshold 70 80
Add LDEV: 368 to the pool ID: 10 for Thin Provisioning/Smart Tiers.
# raidcom add thp_pool -pool_id 10 -ldev_id 368
By using LDEV belonging to the device group: grp1, creating a pool of Pool ID:1, Pool Name:
Allocated automatically for Thin Provisioning.
# raidcom add thp_pool -pool_id 1 -grp_opt ldev -device_grp_name grp1

raidcom get thp_pool

Displays pool information for Thin Provisioning/Smart Tiers.
Description
Specifies an LDEV number (0-65279). Up to 64 of LDEVs can be specified at a time.
For example:
-ldev_id 100
-ldev_id 100 - 1 10
-ldev_id 100 -cnt 10
Specifies a count (2-64).
The count becomes singular if not specified.
Up to 64 of LDEVs can be specified at a time.
Specifies the device information extracted from the LDEV belonging to the device group. Specify
"ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max; 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
You may specify two user-defined thresholds, and their valid ranges are 1- 1 00%, respectively.
If you specify <threshold_1> and <threshold_2>:
The value of <threshold_1> is set as the threshold for WARNING specified to a pool.
The value of <threshold_2> is set as the threshold for High water mark specified to a pool.
If you specify only <threshold_1>, your specified value and the system default value (80%) are
applied. If you omit to specify the value, 70% and 80% are applied automatically.
When you add a pool volume, this option is ignored even if it is specified. If you want to
change the user defined threshold value of the additional pool volume, execute the raidcom
modify pool command.
raidcom get thp_pool 189