Installing a memory module
To install a memory module:
1.
Disconnect power from the system (see
2.
Remove the side access panel (see
3.
Remove the memory fan and system fan.
4.
Push gently outward on the socket levers, as shown:
Figure 4-30
5.
Align the DIMM connector key with the DIMM socket keyway, and then seat the DIMM firmly into
the socket (1), as shown:
Figure 4-31
78
Chapter 4 Removal and replacement procedures
Opening the DIMM socket locking levers
Installing a memory module
Predisassembly procedures on page
Side access panel on page
52).
58).
ENWW