Installing A Memory Module; Supported Dimm Configurations; Memory Module Requirements - HP xw4600 Service And Technical Reference Manual

2. Push gently outward on the socket levers (1).
Figure 4-21
3. Lift the DIMM straight up and out of the socket. Store the DIMM in an anti static bag (2).

Installing a memory module

This section describes how to install a memory module.

Supported DIMM configurations

The HP xw4600 Workstation supports these memory module configurations:
●
Four DIMM slots
●
Memory configuration from 512 MB to 2 GB
●
Dual-channel DIMMs

Memory module requirements

CAUTION:
Because third-party DIMMs might not be electrically or thermally compatible, they are not supported by
HP.
NOTE: DIMMs and their sockets are keyed for proper installation. Be sure these guides line up when
installing DIMMs.
Use only industry-standard, unbuffered, PC2–5300E (667 MHz) or PC2–6400E (800 MHz) DIMMs.
If multiple DIMMs are installed in a workstation, they must be installed in pairs of the same size and type
in each channel.
76 Chapter 4 Removal and replacement procedures
Removing a memory module
HP only ships DIMMs that are electrically and thermally compatible with this workstation.
ENWW