HP Xw6600 - Workstation - 2 GB RAM Technical Reference Manual page 40

Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading
30 Chapter 3 System management
Option Description
●
Remote Wakeup Boot Source—Enables you to set the remote wakeup boot source as:
◦
Local Hard Drive
◦
Remote Server
●
After Power Loss (On, Off, Previous State)—The default is Off.
● POST Delay (in seconds) (5, 10, 15, 20, None)—Adds a specified delay to the POST process.
This delay is sometimes needed for hard drives on some PCI cards that spin up slowly (so
slowly that they are not ready to boot by the time POST is finished). The POST delay also
gives you time to select F10 to enter the Computer Setup (F10) Utility.
● Setup Browse Mode (Enable or Disable)—Enables or disables browse mode setup.
BIOS Power-On Enables you to disable or specify a weekday and time for BIOS power-on.
Processors Provides these options:
●
Multi Core Support (Enable or Disable)—Select a single core or multiple cores per socket.
●
Limit CPUID Maximum Value to 3 (Enable or Disable)—Sets the number of allowable CPU
IDs.
Onboard Enables you to set resources for or disable onboard system devices such as serial ports and
Devices diskette controllers. Operating system parameters generally override Onboard Devices settings.
Chipset/ Provides these options:
Memory
●
PCI SERR# Generation (Enable or Disable)—Controls PCI SERR# generation for ill-behaved
PCI add-in cards (that can generate SERR# spuriously).
● PCI VGA Palette Snooping (Enable or Disable)—Controls PCI VGA Palette Snooping for
compatibility purposes.
● MCH Error Handling—Sets the following signals to use on serious MCH (North Bridge) errors:
◦ SMI which is handled by the BIOS and causes a reboot.
◦
NMI and Machine-Check Error which are handled by the operating system and cause a
crash.
◦
Ignore.
●
Memory Write Combining (Enable or Disable)—Implements special caching for rapid I/O.
Device Options Enables you to set the following device options:
● Num Lock State at Power-On (On or Off)
●
S5 Wake-on-LAN (Enable or Disable)
●
Unique Sleep State Blink Rates (Enable or Disable)
●
Monitor Tracking (Enable or Disable)
●
NIC PXE Option ROM* Download (Enable or Disable)
● SATA RAID Option ROM* Download (Enable or Disable)
● PCIX Secondary Latency Timer:
◦ Default
● Peer-to-Peer Reads
●
Fast Delayed Transaction Timer
Slot 1 — PCI Slot 1 option ROM* download (Enable or Disable).
Express x 8 (4)
ENWW