Perform A Transfer Of Control Reset - HP Rx2620-2 - Integrity - 0 MB RAM Manual

Procedure 4-27 Booting an Inactive nPartition [nPartition Commands]
Boot an inactive nPartition using the following procedure:
1. Log in to a Windows system on which the nPartition Commands bundle is installed.
NOTE:
commands (-h and -g for IPMI over LAN connections; -h and -u for WBEM/WMI
connections). For a complete explanation of these options, see the command description in
"nPartition Commands Reference" (page
2. Enter /usr/sbin/parmodify -B to reconfigure the inactive nPartition.
For example, when you add or remove cells from an inactive nPartition, specifying the -B
option causes the nPartition to boot (become active) immediately following the nPartition
modification.

Perform a transfer of control reset

You can perform a transfer of control (TOC) reset by using the MP TC command, as described
in the following procedure.
If crash dump is configured for the operating system on the nPartition and you TOC the nPartition
while it is running the operating system, then the nPartition performs a crash dump.
Procedure 4-28 Performing a TOC reset [management processor]
Use the MP to perform a TOC reset of an nPartition.
1. Log in to the MP and enter CM to access the Command menu.
2. At the Command menu, enter the TC command, specify which nPartition is to be reset, and
confirm whether to TOC the nPartition.
The TC command performs a transfer-of-control reset on the specified nPartition.
If you access the MP using a single-partition-user account, then the TC command selects
which nPartition is to be reset: the nPartition that your account allows you to access.
If you use an operator or administrator account, you can select which nPartitions in the
server complex you want to TOC.
Be certain to select the correct nPartition to reset.
GSP:CM> TC
This command TOCs the selected partition.
WARNING: Execution of this command irrecoverably halts all system
#
---
0)
1)
Select a partition number: 0
Do you want to TOC partition number 0? (Y/[N]) y
-> The selected partition will be TOCed.
GSP:CM>
62 Using Other Tools to Manage nPartitions
You must include the correct remote administration options when issuing nPartition
processing and I/O activity and restarts the selected
partition.
Name
----
jules00
jules01
89).