Parstatus - HP Rx2620-2 - Integrity - 0 MB RAM Manual

Synopsis
parremove -p PartitionNumber [-F] [-k s_lock:p_lock]
• The -h... -g... options must be specified to cause the command to send its management
request using IPMI over LAN to a MP in another server complex (but can also be used as a
"loopback access" to the MP in the local complex).
• The -h... -u... set of options must be specified to cause the command to send its
management request using WBEM to an nPartition other than the local nPartition (but can
also be used as a "loopback access" to the local nPartition).
The -g and -u options are mutually exclusive.
Options
Option
-p PartitionNumber
-F
-u username:[passwd]
-g [passwd]
-h IPaddress|hostname
-k s_lock

parstatus

The parstatus command displays information about the nPartitions or hardware within a
server complex. If you specify no arguments, parstatus lists information about several of the
major components of the server complex.
You can specify an individual entity (cell, I/O chassis, cabinet, or nPartition) to restrict the output
to information about that component.
All users can issue this command.
Synopsis
parstatus -s
parstatus -w
parstatus [-X]
96 nPartition Commands Reference
Description
Specifies the nPartition number to be removed.
Forcibly remove the nPartition. If the nPartition is inactive, the nPartition is removed.
If the nPartition is active and if it is the local nPartition, the nPartition is removed.
If the nPartition is active but is not the local nPartition, then the nPartition will not be
removed.
Specifies the account and authorization to access an nPartition other than the local
nPartition.
The -h option is required if this option is used.
• username specifies a configured user name on the target nPartition.
• passwd specifies the password associated with the username. If this field is empty,
the command prompts for the password.
Allows access to the complex specified by the -h option. The accessed complex is then
considered the target complex. Access is through the MP LAN port.The -h option is
required if this option is used.
passwd specifies the IPMI password of the MP. If this field is omitted, the command
prompts for the password.
This option is only used in combination with either the -u or -g option.
IPaddress|hostname specifies the IP address or hostname of the target nPartition (-u)
or MP (-g).
Specifies the lock keys for the Stable Complex Configuration Data and Partition
Configuration Data provided by other system management tools that invoke this
command programmatically. Command line users should avoid this option.