Configure Autoboot Options - HP Rx2620-2 - Integrity - 0 MB RAM Manual
Integrity servers with microsoft windows server 2003
Hide thumbs
Also See for Rx2620-2 - Integrity - 0 MB RAM:
- Service manual (177 pages) ,
- User manual (110 pages) ,
- Manual (105 pages)
Table of Contents
Advertisement
•
bcfg boot mv #a #b — Move the item number specified by #a to the position specified
by #b in the boot options list.
•
bcfg boot add # file.efi "Description" — Add a new boot option to the position in
the boot options list specified by #. The new boot option references file.efi and is listed
with the title specified by Description.
See the help bcfg command for details.
3.
Exit the console and MP interfaces when you are finished using them:
a.
To exit the EFI environment press ^B (Control-B). This exits the nPartition console and
returns you to the MP Main Menu.
b.
To exit the MP, enter X at the Main Menu.
Configure autoboot options
Configure autoboot options using any of the following procedures:
Procedure 4-1 1 Configuring autoboot options [EFI Boot Manager]
Configure autoboot options using the EFI Boot Manager as follows:
1.
Access the EFI Boot Manager menu for the nPartition whose autoboot options you want to
configure:
a.
Log in to the MP and enter CO to access the Console list.
b.
Select the nPartition console.
c.
Confirm that you are at the EFI Boot Manager menu (the main EFI menu).
If you are at another EFI menu, select Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
2.
Select Boot option maintenance menu from the main EFI Boot Manager menu.
3.
Select Set Auto Boot TimeOut from the Boot Option Maintenance menu.
4.
At the Set Auto Boot TimeOut menu, either disable autoboot by selecting the Delete/Disable
Timeout menu item, or enable autoboot by setting the autoboot timeout through the Set
Timeout Value menu item.
When autoboot is enabled on an HP Integrity server, the local nPartition boot options are
loaded automatically at boot time, starting with the first item in the boot options list.
For details, see the Help menu.
EFI Boot Maintenance Manager ver 1.10 [14.60]
Set Auto Boot Timeout. Select an Option
Set Timeout Value
Delete/Disable Timeout
Help
Exit
5.
Exit the console and MP interfaces when you are finished using them.
a.
To exit the EFI environment press ^B (Control-B). This exits the nPartition console and
returns you to the MP Main Menu.
b.
To exit the MP, enter X at the Main Menu.
Procedure 4-12 Configuring autoboot options [EFI Shell]
Configure autoboot options using the EFI Shell environment as follows:
50
Using Other Tools to Manage nPartitions
Advertisement
Table of Contents
