HP Rx2620-2 - Integrity - 0 MB RAM Manual page 105

Option
-g [passwd]
-h IPaddress|hostname
Description
Allows access to the complex specified by the -h option. The accessed complex is then
considered the target complex. Access is through the MP LAN port.The -h option is
required if this option is used.
passwd specifies the IPMI password of the MP. If this field is omitted, the command
prompts for the password.
This option is only used in combination with either the -u or -g option. IPaddress|hostname
specifies the IP address or hostname of the target nPartition (-u) or MP (-g).
cplxmodify 105