Boot Over A Network - HP Rx2620-2 - Integrity - 0 MB RAM Manual

1. Access the EFI Boot Manager menu for the system on which you want to boot Windows:
a. Log in to the MP and enter CO to access the Console list.
b. Select the nPartition console.
c. Confirm that you are at the EFI Boot Manager menu (the main EFI menu).
If you are at another EFI menu, select Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
2. At the EFI Boot Manager menu, select an item from the boot options list.
Each item in the boot options list references a specific boot device and provides a specific
set of boot options or arguments to be used when booting the device.
3. Press Enter to initiate booting using the selected boot option.
4. When Windows begins loading, wait for the Special Administration Console (SAC) to become
available.
The SAC interface provides a text-based administration tool that is available from the
nPartition console. For details see the SAC online help (enter ? at the SAC> prompt).
Loading.: Windows Server 2003, Datacenter
Starting: Windows Server 2003, Datacenter
********************************************************************************
Computer is booting, SAC started and initialized.
Use the "ch -?" command for information about using channels.
Use the "?" command for general help.
SAC>
5. Exit the console and MP interfaces when you are finished using them:
a. To exit the console environment press ^B (Control-B). This exits the console and returns
you to the management processor Main menu.
b. To exit the MP, enter X at the Main Menu.

Boot over a network

Boot over a network by using one of the following procedures.
Procedure 4-16 Booting over a network [EFI Boot Manager]
Boot from a network device from the EFI Boot Manager as follows:
1. Access the EFI Boot Manager menu for the nPartition that you want to boot over a network.
a. Log in to the MP and enter CO to access the Console list.
b. Select the nPartition console.
c. Confirm that you are at the EFI Boot Manager menu (the main EFI menu).
If you are at another EFI menu, select Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
2. At the EFI Boot Manager menu, select Boot option maintenance menu.
3. At the Boot Options Maintenance menu, select Boot from a File.
4. Select the network card whose MAC address you want to use when booting, then press
Enter to initiate booting using the selected card.
EFI Boot Maintenance Manager ver 1.10 [14.60]
Boot From a File. Select a Volume
Starting Windows...
nPartition-level tasks 53