HP Rx2620-2 - Integrity - 0 MB RAM Manual page 57

If you access the MP using a single-partition-user account, the RS command selects which
nPartition is to be reset: the nPartition that your account allows you to access.
If you use an operator or administrator management processor account, you can select which
of the nPartitions in the server complex you want to reset.
3. To exit the MP Command menu, enter MA to return to the MP Main Menu.
4. At the Main Menu, enter X to exit the MP interface.
Procedure 4-20 Rebooting and resetting nPartitions [EFI Boot Manager]
To use the EFI Boot Manager to boot and reset nPartitions, do the following:
1. Access the EFI Boot Manager menu for the nPartition that you want to reboot:
a. Log in to the MP and enter CO to access the Console list.
b. Select the nPartition console.
c. Confirm that you are at the EFI Boot Manager menu (the main EFI menu).
If you are at another EFI menu, select Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
2. From the EFI Boot Manager menu, select the Boot option maintenance menu. Then from
the Boot Option Maintenance menu, select the Cold Reset menu to reset the local nPartition.
The Cold Reset menu item resets all active cells in the nPartition and reboots them.
3. Exit the console and MP interfaces when you are finished using them.
a. To exit the EFI environment press ^B (Control-B). This exits the nPartition console and
returns you to the MP Main Menu.
b. To exit the MP, enter X at the Main Menu.
Procedure 4-21 Rebooting and resetting nPartitions [EFI Shell]
To use the EFI Shell environment to boot and reset nPartitions, do the following:
1. Access the EFI Shell environment for the nPartition that you want to reboot:
a. Log in to the MP and enter CO to access the Console list.
b. Select the nPartition console.
c. Confirm that you are at the EFI Boot Manager menu (the main EFI menu).
If you are at another EFI menu, select Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
2. From the EFI Boot Manager menu, select EFI Shell to access the EFI Shell environment.
3. From the EFI Shell environment, issue the reset command to reset the local nPartition.
The reset command resets all active cells in the nPartition and reboots them.
4. Exit the console and MP interfaces when you are finished using them:
a. To exit the EFI environment press ^B (Control-B). This exits the nPartition console and
returns you to the management processor Main Menu.
b. To exit the management processor, enter X at the Main Menu.
nPartition-level tasks 57