List Cabinets In A Server Complex; List Power Status And Power Supplies - HP Rx2620-2 - Integrity - 0 MB RAM Manual

2. Issue the command to list details about I/O chassis and PCI slots.
• parstatus -I — List details about all I/O chassis in the server complex, including
the usage (absent, active, inactive), whether the chassis has Core I/O, and which cell
the I/O chassis is connected to.
NOTE:
commands (-h and -g for IPMI over LAN connections; -h and -u for WBEM/WMI
connections). For a complete explanation of these options, see the command description in
"nPartition Commands Reference" (page

List cabinets in a server complex

Cabinet details include the cabinet type, a list of cells, I/O chassis, power supplies, utilities, fans,
firmware components, interconnecting hardware. Other information such as the power status,
faults, and LED states also are given.
List the cabinets in a server complex using the following procedure:
Procedure 4-40 Listing cabinets in a server complex [nPartition commands]
From the command line, use the parstatus -B command to list all cabinets in the server
complex, or use the parstatus -V -b# command to view a detailed status for the specified
cabinet (-b# where # is the cabinet number).
1. Log in to Windows on the management station PC.
2. Issue commands to list details about cabinets in the target complex.
• parstatus -B — List all cabinets in the server complex.
• parstatus -V -b# — View a detailed status for the specified cabinet (-b# where #
is the cabinet number).
NOTE:
commands (-h and -g for IPMI over LAN connections; -h and -u for WBEM/WMI
connections). For a complete explanation of these options, see the command description in
"nPartition Commands Reference" (page

List power status and power supplies

Power status and power supply information includes the power status (on or off) for cabinets,
cells, and I/O chassis; the status for power supplies (ok or failed); and related details.
List the power status and supplies using the following procedure:
Procedure 4-41 Listing power status and power supplies [nPartition commands]
From the command line, issue the parstatus -B command for a power status summary for
all cabinets, or parstatus -V -b# for detailed power status for the specified cabinet (-b#,
where # is the cabinet number). You also can issue the frupower -d -C command for cell
power status, or the frupower -d -I command for I/O chassis power status.
1. Log in to Windows on the management station PC.
You must include the correct remote administration options when issuing par
You must include the correct remote administration options when issuing par
89).
89).
Power-, status-, and hardware-level tasks 79