Please Read Before Programming; Panel Description And Usage - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function

Please read before programming

Pressing a designated combination of keys will issue a command to the programmer. These key combina-
tions are called 'command'. This chapter describes the method of programming with command.
Cancels an image display.
Lights when the feed is set.
Press this key for smoothing
or editing.
Deletes a part of the data.
Press this key to create a
line or tacking data.
78

Panel description and usage

BAS-Programmer
?
ESC
7
F P
M R 4
C E 1
LI L 0
Programmer
8 9
5 6
2 3
Press this key to start or
end a program.
"Turning power OFF"
(Refer to page 9.)
Press this key to display
the data image being
created.
Press these keys to input
numerical values.
Press this key to cancel
operation.
Press this key to input an
end code.
Press these keys to
advance steps.
Press this key to set the
needle position or use this
key as a part of a command.
Press these keys to move
the needle.