Offset
Command to be used
4
M
5
M
M
It will automatically become the first point to be offset.
1.
Move the needle to the first point to be offset.
Stitch count to be moved
2.
Determine the stitch width, then input
To change the stitch length, input it after this procedure.
Displays the number of the command input.
3.
Move to the last point to be offset.
Stitch count to be moved
4.
Press
twice.
L
Chapter 3 Programming with Command Function
Creating offset. Input the width of offset in
Values 1.0 - 9.9 mm are available for the width
Example
Width
1.5 mm
Offsetting the data to the right side of the sewing path. Input
the width to be offset in
Input the stitch length in
Moving to
stitches ahead.
Moving to
stitches back.
4
Programmer
Input
415
.
.
or
M
5
.
.
M
117