Lines - Brother BAS-761 Instruction Manual

4
Ending program
1. Press .
P

Lines

1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is
displayed.
2. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3. Input the stitch length.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
4. Press .
LI LI
To change the stitch length, specify the pitch value before
pressing .
LI LI
5. Move the needle with
when the needle point is at point B of the
pattern.
6. Repeat steps 4 and 5 and create the program
to point E.
2
Inputting the end code
1. Press
1 1
The needle returns to the sewing start position.
. Press
. Press
.
1 E
Chaprter 3 Programming with Command Function
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
L
L
Programmer 85