Display Screen; Programming Flowchart - Brother BAS-761 Instruction Manual

Display screen

Press and the following screen appears.
P
If the screen is not displayed, press
Displays the command
status.
Displays the current
needle position/total
stitch count.
Programming
Programming
Position the sewing start position, then press
Input the command for programming.
(Refer to page 105.)
Combine straight lines, curves and other figures to make patterns to the pattern
sheet. After completing each pattern, press
The data is available until deletion.
Input end code.
(Refer to page 111.)
Chaprter 3 Programming with Command Function
.
?
Displays distance from the standby position.
Displays the input value.
flowchart
L
Programmer
Displays distance from the
previous needle position.
Displays the end code
"111", if applicable.
Displays the stitch length.
.
L
.
79