Operating Procedure - Brother BAS-761 Instruction Manual

Operating procedure

1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is displayed.
2. Move the needle with
the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
3. Input the stitch length.
3.0 mm is input in the example.
4. Press .
LI LI
To change the stitch length, specify it before pressing
5. Move the needle with
the needle point is at point B of the pattern.
6. Press .
M
7. Move the needle with
the needle point is at point C of the pattern.
8. Repeat step 7 and create the program to point F.
9. Move the needle with
7 8 9 L
G of the pattern.
Point E is programmed to be a corner.
10. Press .
M
11. Repeat steps 7, 8, and 9 and create the program
to point L.
. Press
. Press
. Press
when the needle point is at point
when
L
.
LI LI
when
L
when
L
. Press
Programmer
Chapter 5 Practical programming examples
151