Double Stitch - Brother BAS-761 Instruction Manual

Double stitch

Sewing
width
When the line changes from straight to curve or curve to straight as in points B or E, be sure to press
make a split.
More intermediate points such as points C or D will create smooth curves.
1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is
displayed.
2. Select with
3. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select with
5. Input the stitch length of the double stitch.
Press .
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
To switch input between the stitch length and the width, use
.
6. Select the stitch length with
it.
5.0 mm is input in the example.
Input 050 to make the stitch length to 5.0 mm.
A double stitch is programmed to make two lines
with a constant width.
The example in the left is used for explanation of a
double stitch to the right of sewing direction.
, then press .
. Press
, then press
, then input
Programmer
Chapter 2 Programming with Help Function
.
twice to
29