Brother BAS-761 Instruction Manual page 33

Chapter 2 Programming with Help Function
3. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Program the outer pattern.
5. Press after input of point B.
ESC ESC
The number of pressing
method for outer pattern.
When is used for programming, press twice.
When each stitch is programmed, press once.
6. Select with
7. Move the needle with
when the needle point is at point C of the
pattern.
8. Press .
ESC ESC
9. Program the inner pattern.
10. When point D is programmed, press
The number of pressing
method for inner pattern.
When is used for programming, press twice.
When each stitch is programmed, press once.
2
Inputting the end code
1. Select with
2. Press .
Press and the needle returns to the first stitch(point A).
32
. Press
depends on the programming
ESC ESC
, then press
. Press
ESC ESC
depends on the programming
ESC ESC
, then press
Programmer
.
.
.