Chapter 3 Programming with Command Function
4. The needle point moves to B.
5
Saving
1. Specify the program number on the operation
panel, then press
floppy disk.
Refer to "Using the operation panel of the main body"(page 131)
for detailed operation.
6
Ending program
1. Press
.
P
Deleting the shunting point
1
Calling data
1. Specify the program number on the operation
panel, then press
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Moving to position A.
1. Press
and press
1
The needle moves to the shunting point.
102
switch for writing into the
The shunting point is deleted. The example in the left is
used for explanation of deleting A.
switch to read the data.
.
Programmer