Creating Tacking Data - Brother BAS-761 Instruction Manual

Creating tacking data

Command to be used
9 LI LI
Tacking width of the needle is set with the dial
on the back of the top part of the machine.
Values 1.0 to 3.5 mm are available for the
tacking width.
1. Determine the sewing start position with
2. Determine the stitch length, then input
Displays the number of the command input.
3. Move the needle with
Chapter 3 Programming with Command Function
Create needle tacking data. Input stitch length in
Values 0.1 to 1.0 mm are available for the stitch length.
, then press
Programmer
, then press
.
9 LI
.
L
.
.
L
109