Deleting A Part Of The Program During Programming - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function
2
Moving in parallel
1. Move the needle with
when the needle point is at A of the pattern.
3
Saving
1. Specify the program number on the operation
panel, then press
floppy disk.
Refer to "Using the operation panel of the main body"(page 131)
for detailed operation.
4
Ending program
1. Press .
P

Deleting a part of the program during programming

1. Press in the position 8 to display the screen
ESC ESC
on the right.
2. Input the number of stitches to be deleted, then
press .
The example is deleting 2 stitches backward. Press
3. The needle point moves to 6.
4. Continue programming.
104
. Press
switch for writing into the
A program can be modified during programming. The
example in the left is used for explanation of deleting 2
stitches at 8 and creating a new program.
2
Programmer
L
.