Operating Procedure - Brother BAS-761 Instruction Manual

Chapter 5 Practical programming examples

Operating procedure

1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is displayed.
2. Select with
3. Move the needle with
the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
4. Select with
5. Input the stitch length, then press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6. Move the needle with
the needle point is at point B of the pattern.
7. Repeat step 6 and create the program to point
E.
8. When point E is programmed, press
9. Select icon with
10. Input the number of stitches to return the needle
to the position where two row switch is input,
then press
5 is input in the example. The needle moves 5 stitches back.
138
, then press
. Press
, then press
. Press
, then press
.
.
when
.
.
when
twice.
ESC ESC
.
Programmer